Shop

Scooter

Rim assembly kit for Fastace Ergal forks
WHL014

Rim assembly kit for Fastace Ergal forks

99,00€

VAT INCLUDED

Add to cart
Collettore corto per carb. Ø34-39mm
NTK027

Short manifold for carb. Ø34-39mm

49,00€

VAT INCLUDED

Add to cart
Pistoncini in TITANIO x2 per pinze radiali 8.1 e Formula
BRK180

Titanium pistons x2 for radial calipers 8.1 and Formula

49,50€

VAT INCLUDED

Add to cart
Albero motore 8.1/R-18 Corsa 39.3 Biella 90 Ø75 (per 70cc) per carter Malossi C-One.
SHF007

8.1 / R-18 Crankshaft C39,3 B90 Ø75 (for 70cc) for Malossi crankcase

599,00€

VAT INCLUDED

Add to cart
Scarico completo 8.1 R-18 70cc per carter RC-One Malossi versione Minarelli
XST019

8.1 R-18 70cc full exhaust for Malossi RC-One crankcase Minarelli version

499,00€

VAT INCLUDED

Add to cart
Carter motore completo 8.1 “Fireblade” 70cc per albero Ø maggiorato da 25mm versione Minarelli.
NGN049

Complete engine casing 8.1 “Fireblade” 70cc for shaft Ø increased by 25mm Minarelli version.

1.499,00€

VAT INCLUDED

Add to cart
Disco flottante 8.1 per Yamaha Jog R / Aerox n°3 fori Ø220mm.
BRK012

Floating disc 8.1 for Yamaha Jog R / Aerox n ° 3 holes Ø220mm.

159,00€

VAT INCLUDED

Add to cart
Kit avantreno completo per Yamaha Aerox prima del 2003, forcella JF-1, kit piastre per JF-1, kit distanziali e cerchio 12", pinza Hurricane e disco 220mm
FRM020

Front fork complete kit for Yamaha Aerox before 2003, fork JF-1, plate kit for JF-1, Hurricane caliper, spacers kit and wheel 12″, brake disk 220mm

1.979,00€

VAT INCLUDED

Add to cart
Kit VB-11 pompa freno destra CNC Ø11mm (per freno anteriore) Vespa ET3-Sprint-Primavera Silver
BRK195

Kit VB-11 right brake master cylinder CNC Ø11mm (for front brake) Vespa ET3-Sprint-Primavera Silver

319,00€

VAT INCLUDED

Add to cart
Mounting wheel kit for JF-1 Ergal forks
WHL015

Mounting wheel kit for JF-1 Ergal forks

99,00€

VAT INCLUDED

Add to cart
Paraolio 22,7x47x7mm.
LSL005

Oil seal 22.7x47x7mm.

9,90€

VAT INCLUDED

Add to cart
Alimentazione parz. 8.1-K12 per 100cc collettore orientabile, e inserto guidaflussi per carburatore Ø30mm per carter 8.1 versione Piaggio e Minarelli
NTK012

Partial fuel system for 8.1-K12 100cc long, adjustable manifold (28° inclination respect to the crankcase horizontal line) for Ø30mm carburetor for 8.1 “Fireblade” crankcase Piaggio and Minarelli version

109,00€

VAT INCLUDED

Add to cart
Pistone D52 RACING R18 monofascia, diamantatura specifica per cilindro 100cc Sel. B
NGN109

Piston D52 RACING R18 single ring specific diamond finish, for 8.1 cylinder 100cc Sel. B

88,00€

VAT INCLUDED

Add to cart
Albero motore 8.1/R-18 Corsa 39,3 Biella 85 Ø75 (per 70cc) per carter originali Minarelli.
SHF008

8.1 / R-18 Crankshaft C39,3 B85 Ø75 (for 70cc) for original Minarelli crankcases

599,00€

VAT INCLUDED

Add to cart
Kit guarnizioni completo cilindro 8.1, R1.8 100cc, versione 2021.
NGN087

Complete cylinder gasket kit 8.1, R1.8 100cc, version 2021.

19,90€

VAT INCLUDED

Add to cart
Alimentazione comp. 8.1-K12 per 100cc, collettore orientabile, per carburatore Ø30mm per carter 8.1 versione Piaggio e Minarelli
NTK011

Complete fuel system 8.1-K12 for 100cc, long, adjustable manifold (28° inclination respect to the crankcase horizontal line), for Ø30mm carburetor for 8.1 “Fireblade” crankcase Piaggio and Minarelli version

159,00€

VAT INCLUDED

Add to cart
Ergal Pitbike/JF-1 wheel axle 15mm length 230mm
WHL016

Ergal Pitbike/JF-1 wheel axle 15mm length 230mm

28,00€

VAT INCLUDED

Add to cart
Kit avantreno completo per Yamaha Aerox dopo il 2003, forcella JF-1, kit piastre per JF-1, kit distanziali e cerchio 12", pinza Hurricane e disco 220mm
FRM021

Front fork complete kit for Yamaha Aerox after 2003, fork JF-1, plate kit for JF-1, Hurricane caliper, spacers kit and wheel 12″, brake disk 220mm

1.979,00€

VAT INCLUDED

Add to cart
Pistoncini inox rettificati per pinza radiale 8.1 e Formula RIBASSATI per disco 5mm.
BRK133

Ground stainless steel pistons for 8.1 radial caliper and Formula LOWERED for 5mm disc.

39,00€

VAT INCLUDED

Add to cart
Paraolio 20x32x7mm.
LSL006

Oil seal 20x32x7mm.

13,90€

VAT INCLUDED

Add to cart
Disco flottante 8.1 per cerchio VMC / Pit Bike n°3 fori Ø240mm (diametro maggiorato).
BRK221

8.1 Floating disc for VMC / Pit Bike rim 3 holes Ø240mm (increased diameter).

169,00€

VAT INCLUDED

Add to cart
Kit guarnizioni completo cilindro 8.1, R1.8 70cc, versione 2021.
NGN093

Complete cylinder gasket kit 8.1-R1.8 70cc, version 2021.

19,90€

VAT INCLUDED

Add to cart
Alimentazione comp. 8.1-K12 per 100cc, collettore corto, per carburatore Ø35mm per carter 8.1 versione Piaggio.
NTK009

Complete fuel system 8.1-K12 for 100cc, short manifold, (51° inclination respect to the crankcase horizontal line) for carburetor Ø35mm (39mm modified) for crankcase 8.1 “Fireblade” Piaggio version.

159,00€

VAT INCLUDED

Add to cart
Ergal wheel pin with nut for Fastace forks 15mm axle length 235mm
WHL017

Ergal wheel pin with nut for Fastace forks 15mm axle length 235mm

28,00€

VAT INCLUDED

Add to cart
Kit avantreno completo per Malaguti F12, forcella JF-1, kit piastre per JF-1, kit distanziali e cerchio 12", pinza Hurricane e disco 220mm
FRM022

Front fork complete kit for Malamute F12, fork JF-1, plate kit for JF-1, Hurricane caliper, spacers kit and wheel 12″, brake disk 220mm

1.979,00€

VAT INCLUDED

Add to cart
Kit VB-11 pompa freno destra CNC Ø11mm (per freno anteriore) Vespa Special Silver
BRK190

Kit VB-11 right brake master cylinder CNC Ø11mm (for front brake) Vespa Special Silver

319,00€

VAT INCLUDED

Add to cart
Gusci a rullini SKF HK 2214 (n°2 pz. per confezione – coppia).
BRG003

Needle roller shells SKF HK 2214 (n°2 pcs. per package – pair).

15,90€

VAT INCLUDED

Add to cart
Paraoli 25x40x7mm.
LSL007

Oil seals 25x40x7mm.

24,90€

VAT INCLUDED

Add to cart
Gabbia rulli spinotto pistone 12-17, per 70cc.
SHF009

Piston pin roller cage 12-17, for 70cc.

24,90€

VAT INCLUDED

Add to cart
Cuscinetto SKF 6204-2RSH/C3 20x47x14mm.
BRG004

Bearing SKF 6204-2RSH / C3 20x47x14mm.

9,90€

VAT INCLUDED

Add to cart
Kit rasamenti cilindro 8.1, R1.8 100cc, versione 2021, per camera di scoppio, color metallo sp. 0,10mm, color ottone sp.0,05mm (n° 10 pezzi per confezione).
NGN086

Cylinder shims kit 8.1, R1.8 100cc, version 2021, for combustion chamber, metal color sp. 0.10mm, brass color 0.05mm thick (10 pieces per pack).

13,90€

VAT INCLUDED

Add to cart
Kit piastre avantreno per Yamaha Jog, solo per forcelle Ottopuntouno JF-1
FRM013

Front plate kit for Yamaha Jog, only for forks Ottopuntouno JF-1

429,00€

VAT INCLUDED

Add to cart
Kit VB-11 pompa freno destra CNC Ø11mm (per freno anteriore) Vespa Special Black Edition
BRK191

Kit VB-11 right brake master cylinder CNC Ø11mm (for front brake) Vespa Special Black Edition

319,00€

VAT INCLUDED

Add to cart
Alimentazione parz. 8.1-K4 per 70cc, collettore orientabile e guidaflussi per carburatore Ø25 e 19mm, carter 8.1 versione Piaggio.
NTK006

Partial fuel system 8.1-K4 for 70cc, adjustable manifold and flow guide insert (28° inclination respect to the crankcase horizontal line) for Ø25 and 19mm splayed carburetors, for 8.1 “Fireblade” crankcase Piaggio version.

109,00€

VAT INCLUDED

Add to cart
Gabbia rulli spinotto pistone 14-17, per 100cc.
SHF010

Piston pin roller cage 14-17, for 100cc.

24,90€

VAT INCLUDED

Add to cart
Pompa assiale CNC destra MC-11 Ø11mm (per freno anteriore).
BRK135

Axial CNC right pump MC-11 Ø11mm (for front brake).

199,00€

VAT INCLUDED

Add to cart
Pinza freno Hurricane 8.1 in Avional CNC, interasse 84mm
BRK068

Brake caliper Hurricane 8.1 in Avional CNC, wheelbase 84mm

189,00€

VAT INCLUDED

Select options This product has multiple variants. The options may be chosen on the product page
Alimentazione comp. 8.1-K4 per 70cc, collettore orientabile per carburatore Ø25 e 19mm, per carter 8.1 versione Piaggio e Minarelli.
NTK005

Complete fuel system 8.1-K4 for 70cc, adjustable manifold (28° inclination respect to the crankcase horizontal line), for Ø25 and 19mm splayed carburetors, for 8.1 “Fireblade” crankcase Piaggio and Minarelli versions.

159,00€

VAT INCLUDED

Add to cart
Kit rasamenti cilindro 8.1, R1.8 70cc, versione 2021, per camera di scoppio, color metallo sp. 0,10mm, color ottone sp.0,05mm (n° 10 pezzi per confezione).
NGN103

Cylinder shims kit 8.1, R1.8 70cc, version 2021, for combustion chamber, metal color sp. 0.10mm, brass color 0.05mm thick (10 pieces per pack).

13,90€

VAT INCLUDED

Add to cart
Kit piastre avantreno per Yamaha Aerox prima del 2003, solo per forcelle Ottopuntouno JF-1
FRM014

Front plate kit for Yamaha Aerox before 2003, only for forks Ottopuntouno JF-1

429,00€

VAT INCLUDED

Add to cart
Leva pompa freno Sx completa MC11/MC13/Formula
BRK162

Left brake pump lever MC11/MC13/Formula

49,00€

VAT INCLUDED

Add to cart
Gabbia rulli spinotto pistone 14-18, per 100cc diametri maggiorati.
SHF011

Piston pin roller cage 14-18, for 100cc oversized diameters.

24,90€

VAT INCLUDED

Add to cart
Pinza freno TITANIUM Hurricane 8.1, interasse 84mm
BRK179

Brake caliper TITANIUM Hurricane 8.1, mounting distance 84mm

299,00€

VAT INCLUDED

Add to cart
Kit O-ring cilindro 8.1, R1.8 100cc, versione 2021, tenuta camera di scoppio, testa, candela e scarico (n° 4 pezzi per confezione).
NGN085

Cylinder O-ring kit, R1.8 100cc, 2021 version, combustion chamber, head, spark plug and exhaust seal (4 pieces per pack).

9,90€

VAT INCLUDED

Add to cart
Kit piastre avantreno per Yamaha Aerox dopo il 2003, solo per forcelle Ottopuntouno JF-1
FRM015

Front plate kit for Yamaha Aerox after 2003, only for forks Ottopuntouno JF-1

429,00€

VAT INCLUDED

Add to cart
Leva pompa freno Sx MC11/MC13/Formula
BRK164

Left brake pump lever MC11/MC13/Formula

33,00€

VAT INCLUDED

Add to cart
Pompa assiale CNC sinistra MC-11 Ø11mm (per freno posteriore).
BRK158

Left CNC axial pump MC-11 Ø11mm (for rear brake).

199,00€

VAT INCLUDED

Add to cart
Guscio a rullini SKF NK24/16 24x32x16mm.
BRG006

Needle roller shell SKF NK24 / 16 24x32x16mm.

24,90€

VAT INCLUDED

Add to cart
Alimentazione parz. 8.1-K4 per 70cc, collettore orientabile e guidaflussi per carburatore Ø30mm, carter 8.1 versione Piaggio.
NTK004

Partial fueling system 8.1-K4 for 70cc, adjustable manifold and flow guide insert (28° inclination respect to the crankcase horizontal line) for Ø30mm carburetor, for 8.1 “Fireblade” Piaggio version crankcase.

109,00€

VAT INCLUDED

Add to cart
Pompa assiale CNC destra MC-13 Ø13mm (per freno anteriore).
BRK136

Axial CNC right pump MC-13 Ø13mm (for front brake).

199,00€

VAT INCLUDED

Add to cart
Alimentazione comp. 8.1-K4 per 70cc, collettore orientabile, per carburatore Ø30mm, carter 8.1 versione Piaggio e Minarelli.
NTK003

Complete fuel system 8.1-K4 for 70cc, adjustable manifold (28° inclination respect to the crankcase horizontal line), for Ø30mm carburetor, for 8.1 “Fireblade” crankcase version Piaggio and Minarelli.

159,00€

VAT INCLUDED

Add to cart
Guarnizioni di base cilindro 8.1 R1.8 100cc, sp.0,30mm (n° 5 pezzi per confezione).
NGN080

Cylinder base gaskets 8.1 R1.8 100cc, anthracite color, thickness 0.30mm (n°5 pieces per pack).

9,90€

VAT INCLUDED

Add to cart
Kit piastre avantreno per Malaguti F12, solo per forcelle Ottopuntouno JF-1
FRM016

Front plate kit for Malaguti F12, only for forks Ottopuntouno JF-1

429,00€

VAT INCLUDED

Add to cart
Pinza freno Hurricane 8.1 in Avional CNC, interasse 82mm (Stage6, Adelin, RPM).
BRK137

Hurricane 8.1 brake caliper in Avional CNC, wheelbase 82mm (Stage6, Adelin, RPM).

189,00€

VAT INCLUDED

Add to cart
Gusci a rullini SKF HK1612 16x22x12mm.
BRG007

Needle roller shells SKF HK1612 16x22x12mm.

16,90€

VAT INCLUDED

Add to cart
Leva pompa freno Dx completa MC11/MC13/Formula
BRK163

Right brake pump lever complete MC11/MC13/Formula

49,00€

VAT INCLUDED

Add to cart
Cuscinetto SKF 6203-TN9/C3 17x40x12mm.
BRG008

Bearing, SKF 6203-TN9 / C3 17x40x12mm.

15,90€

VAT INCLUDED

Add to cart
Guarnizioni di base cilindro 8.1 R1.8 100cc, sp.0,20mm (n° 5 pezzi per confezione).
NGN081

Cylinder base gaskets 8.1 R1.8 100cc, turquoise color, thickness 0.20mm (n ° 5 pieces per pack).

9,90€

VAT INCLUDED

Add to cart
Kit piastre avantreno per Yamaha Jog, per forcelle diametro 45-48mm versione Ottopuntouno JF-1, FG Gubellini, MIR, Fastace e tutte le forcelle di derivazione minigp e Pitbike.
FRM017

Front plate kit for Yamaha Jog, for forks diameter 45-48mm version Ottopuntouno JF-1, FG Gubellini, MIR, Fastace and all forks derived from minigp and Pitbike.

599,00€

VAT INCLUDED

Add to cart
Pompa assiale CNC sinistra MC-13 Ø13mm (per freno posteriore).
BRK159

Left CNC axial pump MC-13 Ø13mm (for rear brake).

199,00€

VAT INCLUDED

Add to cart

Subscribe to the newsletter.

Receive our news and special offers

Fast and guaranteed shipping

Quality
MADE IN ITALY

Secure
Payments

Ottopuntouno, your shop dedicated to customized components and parts for racing motorcycles.

INFO

Terms and conditions
Privacy Policy
Cookie Policy
Contact us

Facebook Instagram

Account

Personal information
Orders
Addresses
Payment methods

PRODUCTS

Brakes
Crankshafts
Oils and lubricants
Fairings
Frame parts
All Products

CONTACT US

© Copyright 2024 | Privacy cookie policy | VAT 01680360334 | Corporate website development by webMT