SKU NTK028 Category Scooter Intake assembly

Home » Shop » Scooter » Motore scooter » Alimentazione scooter » Power Parz. 8.1-K12 for 180cc, short manifold, for carburetor Ø35mm for crankcase 8.1 Piaggio 180 version

SPECIFICATIONS

RECOMMENDED

COMPONENTS

REVIEWS

Alimentazione Parz. 8.1-K12 per 180cc, collettore corto, per carburatore Ø35mm per carter 8.1 versione 180 Piaggio

Power Parz. 8.1-K12 for 180cc, short manifold, for carburetor Ø35mm for crankcase 8.1 Piaggio 180 version

NTK028

109,00€

VAT INCLUDED

8.1-K12 partial fuel system for 180cc short manifold and flow guide insert (inclination 51 ° c.a. With respect to the normal crankcase) for Ø35mm carburetor for 8.1 “Fireblade” crankcase Piaggio 180 version.

Products intended for competition use only, road use prohibited, we disclaim any responsibility for misuse.

The aluminum and rubber manifold is perfectly connected to a flow guide insert always made from solid aluminum, in order not to leave gaps and avoid harmful turbulence. This optimizes the flow pressure on the valve petals. Suitable for VHSH, VHST, PWK carburetors. Made in Italy product.

8.1 also recommends these components for racing...

NTK038

Partial fuel system for 8.1-K12 180cc long, adjustable manifold (28° inclination respect to the crankcase horizontal line) for Ø30mm carburetor for 8.1 “Fireblade” crankcase Piaggio 180 version

109,00€

NTK027

Short manifold for carb. Ø34-39mm

49,00€

NTK014

Gaskets for reed valve pack and manifold 8.1-K12 for 100cc, for crankcase 8.1 “Fireblade” Piaggio and Minarelli version.

4,90€

NTK008

Gaskets for reed valve pack and manifold 8.1-K4 for 70cc, for crankcase 8.1 “Fireblade” Piaggio and Minarelli version. Ulteriori

4,90€

NTK006

Partial fuel system 8.1-K4 for 70cc, adjustable manifold and flow guide insert (28° inclination respect to the crankcase horizontal line) for Ø25 and 19mm splayed carburetors, for 8.1 “Fireblade” crankcase Piaggio version.

109,00€

NTK004

Partial fueling system 8.1-K4 for 70cc, adjustable manifold and flow guide insert (28° inclination respect to the crankcase horizontal line) for Ø30mm carburetor, for 8.1 “Fireblade” Piaggio version crankcase.

109,00€

Components or spare parts for this product

Nessun prodotto consigliato disponibile.

Leave a review!

Reviews

There are no reviews yet.

Be the first to review “Power Parz. 8.1-K12 for 180cc, short manifold, for carburetor Ø35mm for crankcase 8.1 Piaggio 180 version”